We hold and supply spare parts for the compressors we sell and service, and for most other makes besides. That covers filters, separators, oil, service kits, valves, pump units and dryer elements — for CompAir, Hydrovane, Bambi, Champion, ABAC, Mattei, Gardner Denver and others.
If you know the part number, use the search or browse below. If you don’t, that is what our counter staff are for.
Finding the right part
Compressor spares are rarely interchangeable between models, and manufacturers frequently change specification mid-series without changing the machine name. Bambi filter elements are a good example — the correct element depends on the build date and the colour of the filter housing, not just the model.
To identify a part quickly, have these to hand:
Machine model and serial number — on the data plate, usually on the frame or inside the canopy
The old part, or its part number if it is still legible
Approximate age of the machine, or the year it was installed
A photo of the component in situ — often faster than any description
Send those to [email protected] or call 0800 0278 442 and we will identify it for you.
What we stock
Air and oil filters — inlet filters, oil filters and in-line filtration elements
Oil separators and separator kits
Compressor oil — mineral and synthetic, in manufacturer-approved grades
Service kits — matched sets for scheduled intervals
General spares — our largest parts category, over 650 items
Genuine parts, and why we recommend them
We supply genuine manufacturer parts as standard. Pattern parts are usually cheaper up front, but on rotary screw machines a non-approved separator or the wrong oil grade can shorten air-end life considerably, and will normally invalidate any remaining warranty. Where a quality equivalent exists and the machine is out of warranty we will say so — but we will not substitute without telling you.
Servicing as well as parts
If you would rather not do the work yourself, we service compressors across London and the South East as well as supplying parts over the counter. Planned maintenance agreements spread the cost and mean the right parts are on the van before the engineer arrives.
Trade counter and collection
Our trade counter in High Wycombe is open 8.00am to 5.30pm, Monday to Friday, at Hillbottom Road, Sands Industrial Estate, HP12 4HJ. Parts held in stock can be collected the same day. Call ahead on 0800 0278 442 and we will have it ready.
Not sure what you need? Call us with the model and serial number — we have been doing this since 1963 and can usually identify a part from a photo and a description.
CompAir compressor service parts
We carry a full range of CompAir compressor service parts — air and oil filters, separator elements, valve kits and complete service kits matched to the L Series, D Series and Airstation machines. Tell us the model and serial number and we will confirm the right kit before you order, because compressor spares are rarely interchangeable between variants of the same model.
If you run your CompAir service schedule in-house, we can hold the consumables for your next interval so they are on the shelf when the hours come up. If you would rather we handled the CompAir service, our engineers cover London and the Home Counties and work on machines whether or not we supplied them.
Why genuine parts are worth it
Pattern filters and separators look cost effective up front, but a separator that lets oil carry over costs far more in downtime and contaminated product than the part ever saved. Genuine elements hold their rated efficiency across the full service interval, which protects energy efficiency on screw compressors and keeps the warranty intact on newer machines.
“MHF1325 — Self-fastening hoses with internal textile yard for NBR & EPDM and external metallic braid for silicone & FKM” has been added to your basket. View basket
MHF1025 — Parker Legris self-fastening hoses are designed to be used with barb fittings or mold quick couplers to convey in-plant industrial fluids. They offer both excellent sealing and robustness with the simplicity of installation for a long life span
MHF1325 — Parker Legris self-fastening hoses are designed to be used with barb fittings or mold quick couplers to convey in-plant industrial fluids. They offer both excellent sealing and robustness with the simplicity of installation for a long life span
MHS1025 — Parker Legris self-fastening hoses are designed to be used with barb fittings or mold quick couplers to convey in-plant industrial fluids. They offer both excellent sealing and robustness with the simplicity of installation for a long life span
MHS1025B — Parker Legris self-fastening hoses are designed to be used with barb fittings or mold quick couplers to convey in-plant industrial fluids. They offer both excellent sealing and robustness with the simplicity of installation for a long life span
MHS1025R — Parker Legris self-fastening hoses are designed to be used with barb fittings or mold quick couplers to convey in-plant industrial fluids. They offer both excellent sealing and robustness with the simplicity of installation for a long life span
MHS1325 — Parker Legris self-fastening hoses are designed to be used with barb fittings or mold quick couplers to convey in-plant industrial fluids. They offer both excellent sealing and robustness with the simplicity of installation for a long life span
MHS1325B — Parker Legris self-fastening hoses are designed to be used with barb fittings or mold quick couplers to convey in-plant industrial fluids. They offer both excellent sealing and robustness with the simplicity of installation for a long life span
MHS1325R — Parker Legris self-fastening hoses are designed to be used with barb fittings or mold quick couplers to convey in-plant industrial fluids. They offer both excellent sealing and robustness with the simplicity of installation for a long life span
Parker Mushroom 40Mm Red Latch/Turn 40mm. Genuine Parker Hannifin component for pneumatic and compressed air systems. OEM quality for reliable performance in industrial automation applications.
N164 1001 — Shuttle valves provide a single pneumatic output from two separate inputs and can be used in multiple applications such as “OR” logic, memory, or interlock circuits. They provide a pneumatic output when pressure is applied to either 2 inlet ports.
N164 2003 — Shuttle valves provide a single pneumatic output from two separate inputs and can be used in multiple applications such as “OR” logic, memory, or interlock circuits. They provide a pneumatic output when pressure is applied to either 2 inlet ports.
NV101F-6-4 — Parker’s all brass needle valves have a metal-to-metal seats and are for use in applications in which the desired flow must be maintained with little to no variance.
NV104C-4-2 — Parker’s all brass needle valves have a metal-to-metal seats and are for use in applications in which the desired flow must be maintained with little to no variance.
NV104C-5-2 — Parker’s all brass needle valves have a metal-to-metal seats and are for use in applications in which the desired flow must be maintained with little to no variance.
NV105C-4 — Parker’s all brass needle valves have a metal-to-metal seats and are for use in applications in which the desired flow must be maintained with little to no variance.